The no-sign-up calculator

The calculator uses population averages, because it only knows three things: the first day of your last period, your cycle length and your period length. Calling the first day of your period day 1:

  • Next period = day 1 + cycle length
  • Likely ovulation = next period − 13 days
  • Fertile window = the 6 days ending on ovulation day (the 5 days before plus the day itself)
  • Most fertile days = the 2 days before ovulation and ovulation day
  • Most reliable pregnancy test = from the day your period is due
  • Irregular cycle: the fertile window runs from day (shortest cycle − 18) to day (longest cycle − 11)

Why 13 and not 14? The phase after ovulation (luteal phase) averaged 12.4 days in a study of more than 600,000 cycles (Bull, 2019). The textbook “14” is an old rounding. Why 6 days? Sperm survive a few days and the egg about one; in Wilcox’s study (1995), pregnancies only came from sex in the 5 days before ovulation or on the day itself. The irregular-cycle rule is the calendar method from the WHO handbook.

The approximate chance of pregnancy from sex on each day, which AVEN uses to highlight the best days:

Day relative to ovulationApproximate chance
5 days before10%
4 days before15%
3 days before17%
2 days before27%
1 day before31%
ovulation day33%
1 day after3%

Values from Wilcox (1995), lightly smoothed. They are averages for healthy couples; each person’s real chance is different.

What happens to what you type

In the calculator, the next period calculator and the printable calendar, the math runs in your browser. The dates you type are not sent to AVEN, not stored, and these pages use no tracking tools.

  • How to check: once the page is open, turn on airplane mode and calculate. It works the same, because nothing goes to the internet. If you are tech-savvy, open your browser’s “Network” tab and see that no request is made when you press Calculate.
  • One honest detail: the dates are kept in the page address (that is what lets you share your result). If you reload the page or send the link to someone, the address goes with it, like any link.
  • In the app (with an account), your logs are stored on the server so they sync across devices. Where they are kept, how they are protected, and how to export or delete them is in the privacy policy.

The app: how your history changes the math

In the app, AVEN swaps population averages for yours as you log:

  • Cycle length: the average of your last 12 cycles (15 to 60 days). Recent ones count more: each cycle further back weighs 80% of the next one. A cycle far from the others (say, a period you forgot to log) is left out: more than 4 days from the median, or more than 3 “robust” deviations, whichever is larger. While there are few cycles, the math starts from the length you gave at sign-up (or 28 days): it counts as 2/3 of a cycle when you have 1 logged cycle, 1/3 with 2, and stops counting from 3. From then on, the length is yours alone.
  • Fixed length: if you pick a length in Settings, AVEN uses yours. When 3 or more logged cycles are 2 or more days off, it tells you and suggests going back to the automatic calculation, but it never switches on its own.
  • Luteal phase (ovulation to period): starts at 13 days. Once you have ovulations logged or found from your signs, AVEN measures how many days followed each one (7 to 18) and uses your average.
  • Next period: start of the last one + your cycle length. If an ovulation already showed up this cycle (LH test, temperature or marked by you), the math switches to ovulation + your luteal phase, which is usually more accurate. If you move the date yourself, yours wins.
  • Late period: if your period is past its date, AVEN shows the days late and recalculates the next cycles from today.
  • Fertile window in the app: from 5 days before the estimated ovulation to 1 day after. With the “Wider fertile window” option, it adds your cycle variation to both ends.
  • Past cycles: each one’s ovulation is the logged one, or else 13 days (or your luteal phase) before the next period.

You can see this math applied to your own data in the app, under Insights → “Why these dates”.

Ovulation signs: LH and temperature

  • Positive LH test: ovulation usually comes 24 to 36 hours after the LH surge starts, so AVEN marks ovulation on the day after the first positive test of the cycle (from cycle day 6; in a cycle that has already ended, only if at least 7 days are left before the next period).
  • Basal body temperature, “3 over 6” rule: three readings in a row above the highest of the 6 before, the third at least 0.2 °C higher. Ovulation is the day before the first high reading. The 6 comparison readings must be recent (within 10 days) and the 3 high ones close together (within 4 days). Readings you marked “discard” (bad night, fever) are left out.
  • Priority: an ovulation you mark yourself beats LH, and LH beats temperature. Fertile mucus does not change the date; it shows as a supporting sign on the chart.

How far off a prediction can be

Every predicted date in the app comes with an “earliest / latest” range. Its width is your cycle variation (the standard deviation, rounded, at least 1 day), and it grows for cycles further ahead: it is multiplied by the square root of how many cycles ahead. With fewer than 2 cycles logged, AVEN assumes 2 days of variation. That is why next month’s prediction is firmer than the one six months away, and the app shows this instead of hiding it.

Worked examples

1. Calculator, 28-day cycle. Next period on day 29. Likely ovulation on day 16 (29 − 13). Fertile window from day 11 to 16, with days 14, 15 and 16 the most fertile. Pregnancy test from day 29.

2. Calculator, irregular cycle between 26 and 32 days. Fertile window from day 8 (26 − 18) to day 21 (32 − 11). It is wide on purpose: when cycles vary, ovulation varies too.

3. App, five cycles: 28, 30, 45, 29 and 27 days. The 45-day one is left out (probably a period that was not logged). The weighted average of the other four is 28.3 days (with 3 or more cycles, the starting point no longer counts); the variation is 1.2 days. Result: next period on day 29 of the current cycle, range day 28 to 30; for the cycles after that the range widens: ±2 days, then ±3 further ahead. Estimated ovulation on day 16 and fertile window from day 11 to 17.

4. App, positive LH test on day 14. AVEN marks ovulation on day 15 and updates the prediction: next period on day 28 (15 + 13) instead of the calendar average. This cycle’s fertile window becomes day 10 to 16, marked as based on your signs.

What this math does not do

  • It is not birth control. Ovulation shifts from cycle to cycle: in one study, only about 30% of women had their whole fertile window within cycle days 10 to 17, even with regular cycles (Wilcox, 2000).
  • It does not diagnose anything. Very short or long cycles, unexpected bleeding, PCOS, the months after giving birth, breastfeeding or coming off birth control change the pattern. In those cases the prediction is only a starting point, and it is worth talking to a health professional.
  • It depends on what is logged. A forgotten period or one logged on the wrong day shifts the average. AVEN ignores cycles far from the pattern, but it cannot guess what is missing.
  • The per-day chances are population averages for couples with no known fertility problem. They are not any one person’s chance.

How we check the math

All of this math (calculator, prediction, ovulation estimate from LH and temperature, uncertainty ranges) has automated tests, with normal cases and edge cases: very short and very long cycles, a single cycle, missing data, forgotten cycles, LH at the end of a cycle. The tests run before every update of the website and the web app, and an update that breaks any of the math does not go live. The examples on this page were computed with AVEN’s own code.